Let's learn about microprocessors, microcontrollers, and PLCs as the main devices used to create electronic brains through 'Let's Learn about Devices Used in Electronic Brain Manufacturing'. We will now know about the supporting devices used to create the electronic brain.
Usually, it has an SPDT (single pole double throw) switch. In normal cases (when a certain amount of voltage is not provided in the coil) the pole is connected to one of the two contact points of the switch. The pole is connected to another contact point when the required voltage is provided to the coil. Relay allows switching of devices that operate at higher voltages through lower voltage.
 |
| Tools used to create an electronic brain |
Supported Devices for Electronic Brain Making:
RAM, ROM, sensors, A / D and D / A converters, counters, relays, etc. are used as auxiliary devices for the manufacture of an electronic brain.RAM:
RAM is Random-Access Memory. As the name implies, it is a memory device. The term RAM is very familiar to those of us who have a general idea about computer structure. Basically, all data that the microprocessor works on is stored in RAM initially. We all know that if the text on the computer is not saved then the power supply is suddenly shut down and the text is no longer returned. The only reason for this is the RAM. Data stored in RAM is erased when the power supply becomes corrupted. Not only the RAM that is used on the computer. Different controlling devices such as microprocessors also have RAM.ROM:
The ROM is Read-Only Memory. Like RAM, this is a kind of memory. But the difference with RAM is that the data stored in the RAM gets erased but the data stored in the ROM is not erased when there is a power outage. This is why ROM is called permanent memory or memory. However, data can only be stored once on a common ROM. However, data can be stored numerous times in EEPROM.Sensor:
Sensor is used for the conversion of temperature, change of position, change of light, etc. into electrical energy. There are different types of sensors such as contact sensor, proximity sensor, touch sensor, infrared, photo tranCounter:
The counter is a type of device that can calculate the number of electric pulses based on the input. The microprocessor, used as an electronic brain, also has a counter inside the microcontroller and is used differently.Relay:
Relay is a type of electromagnetic switch.Usually, it has an SPDT (single pole double throw) switch. In normal cases (when a certain amount of voltage is not provided in the coil) the pole is connected to one of the two contact points of the switch. The pole is connected to another contact point when the required voltage is provided to the coil. Relay allows switching of devices that operate at higher voltages through lower voltage.
0 Comments